Description
VFD-C2000 series inverters
The VFD-C2000 inverters are a series of vector frequency inverters designed for demanding and extensive applications. It has wide control possibilities, modular design, wide range of applications, removable panel, built-in safety input and PLC controller. All these features together with the wide power range make one of the most versatile inverters on the market.
PARAMETERS:
- Control: scalar (U / F, U / F + encoder), sensorless vector (SVC, FOC Sensorless, PM Sensorless, IPM Sensorless), closed loop vector (FOC + PG, PM FOC + PG)
- Working mode: speed / torque / position
- Overload capacity: 230V / 460V 120% for a minute, 160% for 3 seconds (Normal operation)
- 150% for a minute, 180% for 3 seconds (Hard work)
- 575V / 690V 120% for a minute (Light operation)
- 120% for a minute, 150% for 3 seconds (Normal Operation)
- 120% for a minute, 180% for 3 seconds (Hard work)
- Possibility to work with asynchronous (AC) and synchronous motors with permanent magnets (PM)
- Availability in a wide power range
- Built-in programmable PLC 10k steps
- The design of the drive allows for long-term continuous operation
- Full protection of the drive and engine. The structure is designed to work in harsh industrial conditions
- Removable programmer (can be mounted on a control cabinet)
- Possibility of simultaneous installation of 3 expansion cards of different types
- Built-in communication via the MODBUS protocol with the RS-485 interface and the possibility of using additional ones
- communication cards: PROFIBUS DP, DeviceNet, MODBUS TCP, EtherNet / IP and CANopen
- Built-in safety input
EXTENSIONS TO THE VFD-C2000 INVERTER
Output input expansion cards:
EMC-R6AA
- I / O expansion card 6 relay outputs
- the ability to assign functions to outputs depending on the inverter settings
- resistive load 5 A NO 250 VAC / 5A NO 30 VDC
- inductive load 2 A NO 250 VAC / 2 A NO 30 VDC
EMC-D42A
- I / O expansion card 4 DC inputs and 2 outputs
- the ability to assign functions to inputs and outputs depending on the inverter settings
- inputs can be switched via an external or internal 24 VDC power supply
- possibility to switch with J1 jumper between SINK and SOURCE
- maximum load of the 48VDC 50 mA output
EMC-D611
- I / O expansion card 6 AC inputs
- the possibility of assigning functions to inputs depending on the inverter settings
- 100 - 130 VAC input signal with a frequency of 47-63 Hz
- input ON time 10 ms, OFF time 20 ms
Communication cards:
EMC-COP01
CANopen card
- RJ45 interface
- CAN data transmission method
- Baud rate 1M 500k 250k 125k 100k 50k
- Supports CANopen protocols
CMC-EIP01
Ethernet IP and Modbus TCP card
- RJ45 interface with Auto MDI / MDIX
- Transmission speed 10/100 Mbps
- Supports ICMP, IP, TCP, UDP, DHCP, HTTP, SMTP, MODBUS OVER TCP / IP, EtherNet / IP, Delta Configuration protocols
- Configuration with inverter parameters or via Ethernet
CMC-MOD01
Modbus TCP card
- RJ45 interface with Auto MDI / MDIX
- Transmission speed 10/100 Mbps
- Supports ICMP, IP, TCP, UDP, DHCP, HTTP, SMTP, MODBUS OVER TCP / IP protocols,
APPS: MACHINES WITH HIGH INERTIA
- Large power range and high overload capacity of inverters
- Removable LCD panel that can be mounted on the control cabinet
- Expandable with an additional communication card allows the inverter to be easily integrated into a complete control system
- The structure is designed to work in harsh industrial conditions.
- Possibility to connect the REG2000 regenerative energy system
